菜单

pool的属性绑定

2019年8月8日 - 4166am金沙下载

spring boot tomcat jdbc pool的属性绑定,tomcatjdbc

下面看下spring boot tomcat jdbc pool的属性绑定代码,具体代码如下所示:

spring:
 datasource:
 type: org.apache.tomcat.jdbc.pool.DataSource
 driver-class-name: org.postgresql.Driver
 url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
 username: postgres
 password: postgres
 jmx-enabled: true
 initial-size: 1
 max-active: 5
 ## when pool sweeper is enabled, extra idle connection will be closed
 max-idle: 5
 ## when idle connection > min-idle, poolSweeper will start to close
 min-idle: 1

使用如上配置,最后发现initial-size,max-active,max-idle,min-idle等配置均无效,生成的tomcat
jdbc datasource还是使用的默认的配置

正确配置

spring:
 datasource:
 type: org.apache.tomcat.jdbc.pool.DataSource
 driver-class-name: org.postgresql.Driver
 url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
 username: postgres
 password: postgres
 jmx-enabled: true
 tomcat: ## 单个数据库连接池,而且得写上tomcat的属性配置才可以生效
  initial-size: 1
  max-active: 5
  ## when pool sweeper is enabled, extra idle connection will be closed
  max-idle: 5
  ## when idle connection > min-idle, poolSweeper will start to close
  min-idle: 1

注意,这里把具体tomcat数据库连接池的配置属性放到了spring.datasource.tomcat属性下面,这样才可以生效。

源码解析

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceAutoConfiguration.java
@Configuration
 @Conditional(PooledDataSourceCondition.class)
 @ConditionalOnMissingBean({ DataSource.class, XADataSource.class })
 @Import({ DataSourceConfiguration.Tomcat.class, DataSourceConfiguration.Hikari.class,
 DataSourceConfiguration.Dbcp.class, DataSourceConfiguration.Dbcp2.class,
 DataSourceConfiguration.Generic.class })
 @SuppressWarnings("deprecation")
 protected static class PooledDataSourceConfiguration {
 }

DataSourceConfiguration.Tomcat

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceConfiguration.java
/**
 * Tomcat Pool DataSource configuration.
 */
 @ConditionalOnClass(org.apache.tomcat.jdbc.pool.DataSource.class)
 @ConditionalOnProperty(name = "spring.datasource.type", havingValue = "org.apache.tomcat.jdbc.pool.DataSource", matchIfMissing = true)
 static class Tomcat extends DataSourceConfiguration {
 @Bean
 @ConfigurationProperties(prefix = "spring.datasource.tomcat")
 public org.apache.tomcat.jdbc.pool.DataSource dataSource(
 DataSourceProperties properties) {
 org.apache.tomcat.jdbc.pool.DataSource dataSource = createDataSource(
  properties, org.apache.tomcat.jdbc.pool.DataSource.class);
 DatabaseDriver databaseDriver = DatabaseDriver
  .fromJdbcUrl(properties.determineUrl());
 String validationQuery = databaseDriver.getValidationQuery();
 if (validationQuery != null) {
 dataSource.setTestOnBorrow(true);
 dataSource.setValidationQuery(validationQuery);
 }
 return dataSource;
 }
 }

可以看到这里的DataSourceProperties仅仅只有spring.datasource直接属性的配置,比如url,username,password,driverClassName。tomcat的具体属性都没有。

createDataSource

protected <T> T createDataSource(DataSourceProperties properties,
 Class<? extends DataSource> type) {
 return (T) properties.initializeDataSourceBuilder().type(type).build();
 }

直接createDataSource出来的org.apache.tomcat.jdbc.pool.DataSource的PoolProperties也是默认的配置

ConfigurationProperties

具体的魔力就在于@ConfigurationProperties(prefix = "spring.datasource.tomcat")这段代码,它在spring容器构造好代理bean返回之前会将spring.datasource.tomcat指定的属性设置到org.apache.tomcat.jdbc.pool.DataSource

spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/context/properties/ConfigurationPropertiesBindingPostProcessor.java
private void postProcessBeforeInitialization(Object bean, String beanName,
 ConfigurationProperties annotation) {
 Object target = bean;
 PropertiesConfigurationFactory<Object> factory = new PropertiesConfigurationFactory<Object>(
 target);
 factory.setPropertySources(this.propertySources);
 factory.setValidator(determineValidator(bean));
 // If no explicit conversion service is provided we add one so that (at least)
 // comma-separated arrays of convertibles can be bound automatically
 factory.setConversionService(this.conversionService == null
 ? getDefaultConversionService() : this.conversionService);
 if (annotation != null) {
 factory.setIgnoreInvalidFields(annotation.ignoreInvalidFields());
 factory.setIgnoreUnknownFields(annotation.ignoreUnknownFields());
 factory.setExceptionIfInvalid(annotation.exceptionIfInvalid());
 factory.setIgnoreNestedProperties(annotation.ignoreNestedProperties());
 if (StringUtils.hasLength(annotation.prefix())) {
 factory.setTargetName(annotation.prefix());
 }
 }
 try {
 factory.bindPropertiesToTarget();
 }
 catch (Exception ex) {
 String targetClass = ClassUtils.getShortName(target.getClass());
 throw new BeanCreationException(beanName, "Could not bind properties to "
  + targetClass + " (" + getAnnotationDetails(annotation) + ")", ex);
 }
 }

注意,这里的annotation就是@ConfigurationProperties(prefix = "spring.datasource.tomcat"),它的prefix是spring.datasource.tomcat PropertiesConfigurationFactory的targetName就是spring.datasource.tomcat

PropertiesConfigurationFactory.bindPropertiesToTarget
spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/bind/PropertiesConfigurationFactory.java
public void bindPropertiesToTarget() throws BindException {
 Assert.state(this.propertySources != null, "PropertySources should not be null");
 try {
 if (logger.isTraceEnabled()) {
 logger.trace("Property Sources: " + this.propertySources);
 }
 this.hasBeenBound = true;
 doBindPropertiesToTarget();
 }
 catch (BindException ex) {
 if (this.exceptionIfInvalid) {
 throw ex;
 }
 PropertiesConfigurationFactory.logger
  .error("Failed to load Properties validation bean. "
  + "Your Properties may be invalid.", ex);
 }
 }

委托给doBindPropertiesToTarget方法

PropertiesConfigurationFactory.doBindPropertiesToTarget
private void doBindPropertiesToTarget() throws BindException {
 RelaxedDataBinder dataBinder = (this.targetName != null
 ? new RelaxedDataBinder(this.target, this.targetName)
 : new RelaxedDataBinder(this.target));
 if (this.validator != null
 && this.validator.supports(dataBinder.getTarget().getClass())) {
 dataBinder.setValidator(this.validator);
 }
 if (this.conversionService != null) {
 dataBinder.setConversionService(this.conversionService);
 }
 dataBinder.setAutoGrowCollectionLimit(Integer.MAX_VALUE);
 dataBinder.setIgnoreNestedProperties(this.ignoreNestedProperties);
 dataBinder.setIgnoreInvalidFields(this.ignoreInvalidFields);
 dataBinder.setIgnoreUnknownFields(this.ignoreUnknownFields);
 customizeBinder(dataBinder);
 Iterable<String> relaxedTargetNames = getRelaxedTargetNames();
 Set<String> names = getNames(relaxedTargetNames);
 PropertyValues propertyValues = getPropertySourcesPropertyValues(names,
 relaxedTargetNames);
 dataBinder.bind(propertyValues);
 if (this.validator != null) {
 dataBinder.validate();
 }
 checkForBindingErrors(dataBinder);
 }

这里借助RelaxedDataBinder.bind方法

getRelaxedTargetNames
private Iterable<String> getRelaxedTargetNames() {
 return (this.target != null && StringUtils.hasLength(this.targetName)
 ? new RelaxedNames(this.targetName) : null);
 }

这里new了一个RelaxedNames,可以识别多个变量的变种

RelaxedNames

spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/bind/RelaxedNames.java
private void initialize(String name, Set<String> values) {
 if (values.contains(name)) {
 return;
 }
 for (Variation variation : Variation.values()) {
 for (Manipulation manipulation : Manipulation.values()) {
 String result = name;
 result = manipulation.apply(result);
 result = variation.apply(result);
 values.add(result);
 initialize(result, values);
 }
 }
 }
 /**
 * Name variations.
 */
 enum Variation {
 NONE {
 @Override
 public String apply(String value) {
 return value;
 }
 },
 LOWERCASE {
 @Override
 public String apply(String value) {
 return value.isEmpty() ? value : value.toLowerCase();
 }
 },
 UPPERCASE {
 @Override
 public String apply(String value) {
 return value.isEmpty() ? value : value.toUpperCase();
 }
 };
 public abstract String apply(String value);
 }

即支持[email protected][name=spring.datasource.tomcat,values=[spring.datasource.tomcat,
spring_datasource_tomcat, springDatasourceTomcat,
springdatasourcetomcat, SPRING.DATASOURCE.TOMCAT,
SPRING_DATASOURCE_TOMCAT, SPRINGDATASOURCETOMCAT]]这7中配置的写法

getPropertySourcesPropertyValues
private PropertyValues getPropertySourcesPropertyValues(Set<String> names,
 Iterable<String> relaxedTargetNames) {
 PropertyNamePatternsMatcher includes = getPropertyNamePatternsMatcher(names,
 relaxedTargetNames);
 return new PropertySourcesPropertyValues(this.propertySources, names, includes,
 this.resolvePlaceholders);
 }

这个方法会把spring.datasource.tomact底下的属性配置拉取到PropertyValues对象里头

RelaxedDataBinder.bind

spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/bind/RelaxedDataBinder.java的bind方法调用的是父类的方法 spring-context-4.3.13.RELEASE-sources.jar!/org/springframework/validation/DataBinder.java
/**
 * Bind the given property values to this binder's target.
 * <p>This call can create field errors, representing basic binding
 * errors like a required field (code "required"), or type mismatch
 * between value and bean property (code "typeMismatch").
 * <p>Note that the given PropertyValues should be a throwaway instance:
 * For efficiency, it will be modified to just contain allowed fields if it
 * implements the MutablePropertyValues interface; else, an internal mutable
 * copy will be created for this purpose. Pass in a copy of the PropertyValues
 * if you want your original instance to stay unmodified in any case.
 * @param pvs property values to bind
 * @see #doBind(org.springframework.beans.MutablePropertyValues)
 */
 public void bind(PropertyValues pvs) {
 MutablePropertyValues mpvs = (pvs instanceof MutablePropertyValues) ?
 (MutablePropertyValues) pvs : new MutablePropertyValues(pvs);
 doBind(mpvs);
 }
 /**
 * Actual implementation of the binding process, working with the
 * passed-in MutablePropertyValues instance.
 * @param mpvs the property values to bind,
 * as MutablePropertyValues instance
 * @see #checkAllowedFields
 * @see #checkRequiredFields
 * @see #applyPropertyValues
 */
 protected void doBind(MutablePropertyValues mpvs) {
 checkAllowedFields(mpvs);
 checkRequiredFields(mpvs);
 applyPropertyValues(mpvs);
 }
 /**
 * Apply given property values to the target object.
 * <p>Default implementation applies all of the supplied property
 * values as bean property values. By default, unknown fields will
 * be ignored.
 * @param mpvs the property values to be bound (can be modified)
 * @see #getTarget
 * @see #getPropertyAccessor
 * @see #isIgnoreUnknownFields
 * @see #getBindingErrorProcessor
 * @see BindingErrorProcessor#processPropertyAccessException
 */
 protected void applyPropertyValues(MutablePropertyValues mpvs) {
 try {
 // Bind request parameters onto target object.
 getPropertyAccessor().setPropertyValues(mpvs, isIgnoreUnknownFields(), isIgnoreInvalidFields());
 }
 catch (PropertyBatchUpdateException ex) {
 // Use bind error processor to create FieldErrors.
 for (PropertyAccessException pae : ex.getPropertyAccessExceptions()) {
 getBindingErrorProcessor().processPropertyAccessException(pae, getInternalBindingResult());
 }
 }
 }
 /**
 * Return the underlying PropertyAccessor of this binder's BindingResult.
 */
 protected ConfigurablePropertyAccessor getPropertyAccessor() {
 return getInternalBindingResult().getPropertyAccessor();
 }

最后通过getPropertyAccessor()来设置,这个propertyAccessor就是org.springframework.boot.bind.RelaxedDataBinder$RelaxedBeanWrapper:
wrapping object
[[email protected]],也就包装的org.apache.tomcat.jdbc.pool.DataSource

AbstractPropertyAccessor.setPropertyValues
spring-beans-4.3.13.RELEASE-sources.jar!/org/springframework/beans/AbstractPropertyAccessor.java
@Override
 public void setPropertyValues(PropertyValues pvs, boolean ignoreUnknown, boolean ignoreInvalid)
 throws BeansException {
 List<PropertyAccessException> propertyAccessExceptions = null;
 List<PropertyValue> propertyValues = (pvs instanceof MutablePropertyValues ?
 ((MutablePropertyValues) pvs).getPropertyValueList() : Arrays.asList(pvs.getPropertyValues()));
 for (PropertyValue pv : propertyValues) {
 try {
 // This method may throw any BeansException, which won't be caught
 // here, if there is a critical failure such as no matching field.
 // We can attempt to deal only with less serious exceptions.
 setPropertyValue(pv);
 }
 catch (NotWritablePropertyException ex) {
 if (!ignoreUnknown) {
  throw ex;
 }
 // Otherwise, just ignore it and continue...
 }
 catch (NullValueInNestedPathException ex) {
 if (!ignoreInvalid) {
  throw ex;
 }
 // Otherwise, just ignore it and continue...
 }
 catch (PropertyAccessException ex) {
 if (propertyAccessExceptions == null) {
  propertyAccessExceptions = new LinkedList<PropertyAccessException>();
 }
 propertyAccessExceptions.add(ex);
 }
 }
 // If we encountered individual exceptions, throw the composite exception.
 if (propertyAccessExceptions != null) {
 PropertyAccessException[] paeArray =
  propertyAccessExceptions.toArray(new PropertyAccessException[propertyAccessExceptions.size()]);
 throw new PropertyBatchUpdateException(paeArray);
 }
 }
 @Override
 public void setPropertyValue(PropertyValue pv) throws BeansException {
 PropertyTokenHolder tokens = (PropertyTokenHolder) pv.resolvedTokens;
 if (tokens == null) {
 String propertyName = pv.getName();
 AbstractNestablePropertyAccessor nestedPa;
 try {
 nestedPa = getPropertyAccessorForPropertyPath(propertyName);
 }
 catch (NotReadablePropertyException ex) {
 throw new NotWritablePropertyException(getRootClass(), this.nestedPath + propertyName,
  "Nested property in path '" + propertyName + "' does not exist", ex);
 }
 tokens = getPropertyNameTokens(getFinalPath(nestedPa, propertyName));
 if (nestedPa == this) {
 pv.getOriginalPropertyValue().resolvedTokens = tokens;
 }
 nestedPa.setPropertyValue(tokens, pv);
 }
 else {
 setPropertyValue(tokens, pv);
 }
 }

这里的nestedPa.setPropertyValue(tokens,
pv);真正把spring.datasource.tomcat的属性值设置进去
这里的nestedPa就是org.springframework.boot.bind.RelaxedDataBinder$RelaxedBeanWrapper:
wrapping object
[[email protected]]
最后是调用AbstractNestablePropertyAccessor.processLocalProperty

AbstractNestablePropertyAccessor.processLocalProperty
spring-beans-4.3.13.RELEASE-sources.jar!/org/springframework/beans/AbstractNestablePropertyAccessor.java
private void processLocalProperty(PropertyTokenHolder tokens, PropertyValue pv) {
 PropertyHandler ph = getLocalPropertyHandler(tokens.actualName);
 if (ph == null || !ph.isWritable()) {
 if (pv.isOptional()) {
 if (logger.isDebugEnabled()) {
  logger.debug("Ignoring optional value for property '" + tokens.actualName +
  "' - property not found on bean class [" + getRootClass().getName() + "]");
 }
 return;
 }
 else {
 throw createNotWritablePropertyException(tokens.canonicalName);
 }
 }
 Object oldValue = null;
 try {
 Object originalValue = pv.getValue();
 Object valueToApply = originalValue;
 if (!Boolean.FALSE.equals(pv.conversionNecessary)) {
 if (pv.isConverted()) {
  valueToApply = pv.getConvertedValue();
 }
 else {
  if (isExtractOldValueForEditor() && ph.isReadable()) {
  try {
  oldValue = ph.getValue();
  }
  catch (Exception ex) {
  if (ex instanceof PrivilegedActionException) {
  ex = ((PrivilegedActionException) ex).getException();
  }
  if (logger.isDebugEnabled()) {
  logger.debug("Could not read previous value of property '" +
   this.nestedPath + tokens.canonicalName + "'", ex);
  }
  }
  }
  valueToApply = convertForProperty(
  tokens.canonicalName, oldValue, originalValue, ph.toTypeDescriptor());
 }
 pv.getOriginalPropertyValue().conversionNecessary = (valueToApply != originalValue);
 }
 ph.setValue(this.wrappedObject, valueToApply);
 }
 catch (TypeMismatchException ex) {
 throw ex;
 }
 catch (InvocationTargetException ex) {
 PropertyChangeEvent propertyChangeEvent = new PropertyChangeEvent(
  this.rootObject, this.nestedPath + tokens.canonicalName, oldValue, pv.getValue());
 if (ex.getTargetException() instanceof ClassCastException) {
 throw new TypeMismatchException(propertyChangeEvent, ph.getPropertyType(), ex.getTargetException());
 }
 else {
 Throwable cause = ex.getTargetException();
 if (cause instanceof UndeclaredThrowableException) {
  // May happen e.g. with Groovy-generated methods
  cause = cause.getCause();
 }
 throw new MethodInvocationException(propertyChangeEvent, cause);
 }
 }
 catch (Exception ex) {
 PropertyChangeEvent pce = new PropertyChangeEvent(
  this.rootObject, this.nestedPath + tokens.canonicalName, oldValue, pv.getValue());
 throw new MethodInvocationException(pce, ex);
 }
 }

它使其是使用class
org.springframework.beans.BeanWrapperImpl$BeanPropertyHandler来设置

BeanWrapperImpl$BeanPropertyHandler.setValue
spring-beans-4.3.13.RELEASE-sources.jar!/org/springframework/beans/BeanWrapperImpl.java
@Override
 public void setValue(final Object object, Object valueToApply) throws Exception {
 final Method writeMethod = (this.pd instanceof GenericTypeAwarePropertyDescriptor ?
  ((GenericTypeAwarePropertyDescriptor) this.pd).getWriteMethodForActualAccess() :
  this.pd.getWriteMethod());
 if (!Modifier.isPublic(writeMethod.getDeclaringClass().getModifiers()) && !writeMethod.isAccessible()) {
 if (System.getSecurityManager() != null) {
  AccessController.doPrivileged(new PrivilegedAction<Object>() {
  @Override
  public Object run() {
  writeMethod.setAccessible(true);
  return null;
  }
  });
 }
 else {
  writeMethod.setAccessible(true);
 }
 }
 final Object value = valueToApply;
 if (System.getSecurityManager() != null) {
 try {
  AccessController.doPrivileged(new PrivilegedExceptionAction<Object>() {
  @Override
  public Object run() throws Exception {
  writeMethod.invoke(object, value);
  return null;
  }
  }, acc);
 }
 catch (PrivilegedActionException ex) {
  throw ex.getException();
 }
 }
 else {
 writeMethod.invoke(getWrappedInstance(), value);
 }
 }
 }

这里利用反射找出setXXX方法( 比如setMaxActive ),然后设置进去

多数据源的配置

上面的配置对于单数据源来说是没有问题的,对于多数据源,则配置如下

@Configuration
public class MasterDatasourceConfig {

 @Bean("masterDataSource")
 @ConfigurationProperties(prefix = "spring.datasource.master")
 public DataSource masterDataSource() {
  return DataSourceBuilder.create().build();
 }
}

注意,这里要添加ConfigurationProperties注入tomcat jdbc pool的额外设置

spring:
 datasource:
 master:
  type: org.apache.tomcat.jdbc.pool.DataSource
  driver-class-name: org.postgresql.Driver
  url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
  username: postgres
  password: postgres
  jmx-enabled: true
# tomcat: ## 多数据源的话,这里要去掉tomcat,通通放在数据源前缀下面
  initial-size: 1
  max-active: 5
  ## when pool sweeper is enabled, extra idle connection will be closed
  max-idle: 5
  ## when idle connection > min-idle, poolSweeper will start to close
  min-idle: 1

原先tomcat的配置都要放在数据源前缀的底下,放在spring.datasource.tomcat或者spring.datasource.master.tomcat底下均无法生效。

boot tomcat jdbc
pool的属性绑定,tomcatjdbc 下面看下spring boot tomcat jdbc
pool的属性绑定代码,具体代码如下所示: spring: datasource: type:
org.a…

本文主要研究一下spring boot tomcat jdbc pool的属性绑定

本文主要研究一下spring boot tomcat jdbc pool的属性绑定

错误配置

spring:
  datasource:
    type: org.apache.tomcat.jdbc.pool.DataSource
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
    username: postgres
    password: postgres
    jmx-enabled: true
    initial-size: 1
    max-active: 5
    ## when pool sweeper is enabled, extra idle connection will be closed
    max-idle: 5
    ## when idle connection > min-idle, poolSweeper will start to close
    min-idle: 1

使用如上配置,最后发现initial-size,max-active,max-idle,min-idle等配置均无效,生成的tomcat
jdbc datasource还是使用的默认的配置

错误配置

spring:
  datasource:
    type: org.apache.tomcat.jdbc.pool.DataSource
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
    username: postgres
    password: postgres
    jmx-enabled: true
    initial-size: 1
    max-active: 5
    ## when pool sweeper is enabled, extra idle connection will be closed
    max-idle: 5
    ## when idle connection > min-idle, poolSweeper will start to close
    min-idle: 1

使用如上配置,最后发现initial-size,max-active,max-idle,min-idle等配置均无效,生成的tomcat
jdbc datasource还是使用的默认的配置

正确配置

spring:
  datasource:
    type: org.apache.tomcat.jdbc.pool.DataSource
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
    username: postgres
    password: postgres
    jmx-enabled: true
    tomcat:  ## 单个数据库连接池,而且得写上tomcat的属性配置才可以生效
      initial-size: 1
      max-active: 5
      ## when pool sweeper is enabled, extra idle connection will be closed
      max-idle: 5
      ## when idle connection > min-idle, poolSweeper will start to close
      min-idle: 1

注意,这里把具体tomcat数据库连接池的配置属性放到了spring.datasource.tomcat属性下面,这样才可以生效。

正确配置

spring:
  datasource:
    type: org.apache.tomcat.jdbc.pool.DataSource
    driver-class-name: org.postgresql.Driver
    url: jdbc:postgresql://192.168.99.100:5432/postgres?connectTimeout=6000&socketTimeout=6000
    username: postgres
    password: postgres
    jmx-enabled: true
    tomcat:  ## 单个数据库连接池,而且得写上tomcat的属性配置才可以生效
      initial-size: 1
      max-active: 5
      ## when pool sweeper is enabled, extra idle connection will be closed
      max-idle: 5
      ## when idle connection > min-idle, poolSweeper will start to close
      min-idle: 1

注意,这里把具体tomcat数据库连接池的配置属性放到了spring.datasource.tomcat属性下面,这样才可以生效。

源码解析

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceAutoConfiguration.java

    @Configuration
    @Conditional(PooledDataSourceCondition.class)
    @ConditionalOnMissingBean({ DataSource.class, XADataSource.class })
    @Import({ DataSourceConfiguration.Tomcat.class, DataSourceConfiguration.Hikari.class,
            DataSourceConfiguration.Dbcp.class, DataSourceConfiguration.Dbcp2.class,
            DataSourceConfiguration.Generic.class })
    @SuppressWarnings("deprecation")
    protected static class PooledDataSourceConfiguration {

    }

源码解析

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceAutoConfiguration.java

 @Configuration
    @Conditional(PooledDataSourceCondition.class)
    @ConditionalOnMissingBean({ DataSource.class, XADataSource.class })
    @Import({ DataSourceConfiguration.Tomcat.class, DataSourceConfiguration.Hikari.class,
            DataSourceConfiguration.Dbcp.class, DataSourceConfiguration.Dbcp2.class,
            DataSourceConfiguration.Generic.class })
    @SuppressWarnings("deprecation")
    protected static class PooledDataSourceConfiguration {

    }

DataSourceConfiguration.Tomcat

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceConfiguration.java

    /**
     * Tomcat Pool DataSource configuration.
     */
    @ConditionalOnClass(org.apache.tomcat.jdbc.pool.DataSource.class)
    @ConditionalOnProperty(name = "spring.datasource.type", havingValue = "org.apache.tomcat.jdbc.pool.DataSource", matchIfMissing = true)
    static class Tomcat extends DataSourceConfiguration {

        @Bean
        @ConfigurationProperties(prefix = "spring.datasource.tomcat")
        public org.apache.tomcat.jdbc.pool.DataSource dataSource(
                DataSourceProperties properties) {
            org.apache.tomcat.jdbc.pool.DataSource dataSource = createDataSource(
                    properties, org.apache.tomcat.jdbc.pool.DataSource.class);
            DatabaseDriver databaseDriver = DatabaseDriver
                    .fromJdbcUrl(properties.determineUrl());
            String validationQuery = databaseDriver.getValidationQuery();
            if (validationQuery != null) {
                dataSource.setTestOnBorrow(true);
                dataSource.setValidationQuery(validationQuery);
            }
            return dataSource;
        }

    }

可以看到这里的DataSourceProperties仅仅只有spring.datasource直接属性的配置,比如url,username,password,driverClassName。tomcat的具体属性都没有。

DataSourceConfiguration.Tomcat

spring-boot-autoconfigure-1.5.9.RELEASE-sources.jar!/org/springframework/boot/autoconfigure/jdbc/DataSourceConfiguration.java

 /**
     * Tomcat Pool DataSource configuration.
     */
    @ConditionalOnClass(org.apache.tomcat.jdbc.pool.DataSource.class)
    @ConditionalOnProperty(name = "spring.datasource.type", havingValue = "org.apache.tomcat.jdbc.pool.DataSource", matchIfMissing = true)
    static class Tomcat extends DataSourceConfiguration {

        @Bean
        @ConfigurationProperties(prefix = "spring.datasource.tomcat")
        public org.apache.tomcat.jdbc.pool.DataSource dataSource(
                DataSourceProperties properties) {
            org.apache.tomcat.jdbc.pool.DataSource dataSource = createDataSource(
                    properties, org.apache.tomcat.jdbc.pool.DataSource.class);
            DatabaseDriver databaseDriver = DatabaseDriver
                    .fromJdbcUrl(properties.determineUrl());
            String validationQuery = databaseDriver.getValidationQuery();
            if (validationQuery != null) {
                dataSource.setTestOnBorrow(true);
                dataSource.setValidationQuery(validationQuery);
            }
            return dataSource;
        }

    }

可以看到这里的DataSourceProperties仅仅只有spring.datasource直接属性的配置,比如url,username,password,driverClassName。tomcat的具体属性都没有。

createDataSource

protected <T> T createDataSource(DataSourceProperties properties,
            Class<? extends DataSource> type) {
        return (T) properties.initializeDataSourceBuilder().type(type).build();
    }

直接createDataSource出来的org.apache.tomcat.jdbc.pool.DataSource的PoolProperties也是默认的配置

createDataSource

protected <T> T createDataSource(DataSourceProperties properties,
            Class<? extends DataSource> type) {
        return (T) properties.initializeDataSourceBuilder().type(type).build();
    }

直接createDataSource出来的org.apache.tomcat.jdbc.pool.DataSource的PoolProperties也是默认的配置

ConfigurationProperties

具体的魔力就在于@ConfigurationProperties(prefix =
“spring.datasource.tomcat”)这段代码,它在spring容器构造好代理bean返回之前会将spring.datasource.tomcat指定的属性设置到org.apache.tomcat.jdbc.pool.DataSource

spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/context/properties/ConfigurationPropertiesBindingPostProcessor.java

private void postProcessBeforeInitialization(Object bean, String beanName,
            ConfigurationProperties annotation) {
        Object target = bean;
        PropertiesConfigurationFactory<Object> factory = new PropertiesConfigurationFactory<Object>(
                target);
        factory.setPropertySources(this.propertySources);
        factory.setValidator(determineValidator(bean));
        // If no explicit conversion service is provided we add one so that (at least)
        // comma-separated arrays of convertibles can be bound automatically
        factory.setConversionService(this.conversionService == null
                ? getDefaultConversionService() : this.conversionService);
        if (annotation != null) {
            factory.setIgnoreInvalidFields(annotation.ignoreInvalidFields());
            factory.setIgnoreUnknownFields(annotation.ignoreUnknownFields());
            factory.setExceptionIfInvalid(annotation.exceptionIfInvalid());
            factory.setIgnoreNestedProperties(annotation.ignoreNestedProperties());
            if (StringUtils.hasLength(annotation.prefix())) {
                factory.setTargetName(annotation.prefix());
            }
        }
        try {
            factory.bindPropertiesToTarget();
        }
        catch (Exception ex) {
            String targetClass = ClassUtils.getShortName(target.getClass());
            throw new BeanCreationException(beanName, "Could not bind properties to "
                    + targetClass + " (" + getAnnotationDetails(annotation) + ")", ex);
        }
    }

注意,这里的annotation就是@ConfigurationProperties(prefix =
“spring.datasource.tomcat”),它的prefix是spring.datasource.tomcat
PropertiesConfigurationFactory的targetName就是spring.datasource.tomcat

ConfigurationProperties

具体的魔力就在于@ConfigurationProperties(prefix =
“spring.datasource.tomcat”)这段代码,它在spring容器构造好代理bean返回之前会将spring.datasource.tomcat指定的属性设置到org.apache.tomcat.jdbc.pool.DataSource

spring-boot-1.5.9.RELEASE-sources.jar!/org/springframework/boot/context/properties/ConfigurationPropertiesBindingPostProcessor.java

private void postProcessBeforeInitialization(Object bean, String beanName,
            ConfigurationProperties annotation) {
        Object target = bean;
        PropertiesConfigurationFactory<Object> factory = new PropertiesConfigurationFactory<Object>(
                target);
        factory.setPropertySources(this.propertySources);
        factory.setValidator(determineValidator(bean));
        // If no explicit conversion service is provided we add one so that (at least)
        // comma-separated arrays of convertibles can be bound automatically
        factory.setConversionService(this.conversionService == null
                ? getDefaultConversionService() : this.conversionService);
        if (annotation != null) {
            factory.setIgnoreInvalidFields(annotation.ignoreInvalidFields());
            factory.setIgnoreUnknownFields(annotation.ignoreUnknownFields());
            factory.setExceptionIfInvalid(annotation.exceptionIfInvalid());
            factory.setIgnoreNestedProperties(annotation.ignoreNestedProperties());
            if (StringUtils.hasLength(annotation.prefix())) {
                factory.setTargetName(annotation.prefix());
            }
        }
        try {
            factory.bindPropertiesToTarget();
        }
        catch (Exception ex) {
            String targetClass = ClassUtils.getShortName(target.getClass());
            throw new BeanCreationException(beanName, "Could not bind properties to "
                    + targetClass + " (" + getAnnotationDetails(annotation) + ")", ex);
        }
    }

注意,这里的annotation就是@ConfigurationProperties(prefix =
“spring.datasource.tomcat”),它的prefix是spring.datasource.tomcat
PropertiesConfigurationFactory的targetName就是spring.datasource.tomcat

相关文章

发表评论

电子邮件地址不会被公开。 必填项已用*标注

网站地图xml地图